Power Converter — Watts, kW, HP & BTU/h Factors

Convert watts, kilowatts, mechanical horsepower (~745.7 W), and BTU/h. Exact factors shown — free unit converter on FormulaLib.

Inputs

Where this formula comes from

Power measures energy per time. The SI unit is the watt. Kilowatts are thousands of watts; mechanical horsepower is defined here as ≈ 745.7 W.

BTU per hour appears on heating and cooling equipment. The converter uses 1 BTU/h ≈ 0.293071 W so nameplate figures can be compared across unit systems.

Electrical horsepower and metric horsepower differ slightly from mechanical HP — check which convention your datasheet uses.

Common mistakes

How to use this calculator

Enter a power value and its unit (W, kW, mechanical HP, or BTU/h). The page converts through watts using 1 kW = 1000 W, 1 mechanical HP ≈ 745.7 W, and 1 BTU/h ≈ 0.293071 W.

Nameplates mix conventions: metric horsepower ≈ 735.5 W, and some electrical horsepower definitions differ again. Confirm which HP your datasheet means before treating converter output as contractual.

Do not confuse kilowatts (power) with kilowatt-hours (energy). Energy is power integrated over time; a 2 kW heater running 3 hours uses about 6 kWh.

HVAC BTU/h figures are useful for comparing heating/cooling capacity across unit systems. Coarse rules of thumb drift; prefer the factors shown on this page when reconciling two nameplates.

Motor nameplates may list input electrical power and output mechanical power separately because efficiency is less than 100%. Converting HP to W does not invent efficiency — it only changes units of the same power quantity.

Peak vs continuous ratings differ on many devices. Convert the rating you intend to compare; mixing peak BTU/h with continuous kW misleads sizing decisions.

Solar and inverter literature often mixes W, kW, and sometimes VA (volt-amperes). VA measures apparent power in AC systems and equals W only at power factor 1. This converter moves among W/kW/HP/BTU/h; it does not convert VA↔W without a power factor.

Automotive “horsepower” marketing may use different SAE standards over decades. When comparing two dyno sheets, match the standard first; unit conversion alone cannot reconcile incompatible test methods.

Generator and UPS sizing often starts from kW load plus a safety factor. Convert nameplate HP of a motor to kW first, then apply your factor — do not add factors in mixed units.

Frequently asked questions

How many watts in a kilowatt?
Exactly 1000 W. The converter multiplies or divides by 1000 when moving between W and kW.
What horsepower definition is used?
Mechanical horsepower ≈ 745.7 W. Metric HP is ≈ 735.5 W — check your datasheet if labels disagree.
How is BTU/h converted?
1 BTU/h ≈ 0.293071 W. Useful when comparing heater or cooler nameplates across unit systems.
Is kW the same as kWh?
No. kW is power; kWh is energy (power × time). A 1 kW load running 2 hours uses 2 kWh.